METALLURGICAL MICROSCOPES
DMI Ultima

Polarizing Outfit

  • Analyzer rotatable at 360°. Polarizer & Analyzer can be slide in/out on the optical path.

Standard Accessories

  • 24V/100W halogen tungsten bulb, operating manual, dust cover, guarantee card and Styrofoam molded pack.

Trinocular Observation Head

  • Siedentopf observation head inclined at 45°.
  • Diopter adjustment ring on ocular tube (±5).
  • Inter-pupillary distance from 52mm to 75mm.
  • Focusable vertical phototube for Microphotography.

Eyepiece (Anti fungus)

  • Wide field eyepiece 10X (paired) F.O.V. 20mm.

Objectives (Infinity corrected)

  • M Long working distance plan 5X
  • M Long working distance plan 10X
  • M Long working distance plan 20X
  • M Long working distance plan 50X
  • M Long working distance plan 100X (S.L.) Dry

Illuminator

  • Epi-Koehler’s illumination. Aperture iris diaphragm and field iris diaphragm 24V/100W halogen lamp.
  • Adjustable brightness. Filter wheel fixed in light path with blue, green & yellow filters.

Mechanical Body

  • Co-axial focusing system with large knobs, PRE-FOCUSING LEVER & TENSION ADJUSTMENT RING.
  • Quadruple nosepiece on ball bearing.
  • Mechanical stage is 350mm X 208mm and moving range 50mmX50mm
  • Mechanical stage has low positioned co-axial controls on ball bearing guide ways.
  • Side port with phototube for micro photography.